SPECIFICATION:
* SUITABLE FOR TOP TUBE, DOWN TUBE AND SEAT TUBE MILLING.
* ABLE TO MILL 3 ENDS IN ONE OPERATION (DOWN TUBE FOR HEAD END, B.B. END AND SEAT TUBE END).
* DIAMETER OF TUBE: ∮25.4-50.8 M/M (ROUND TUBE)
* DIAMETER OF OVAL TUBE: MAX. 60 M/M
* ANGLE OF MITERING SECTON: HEAD TUBE END: 45°~105°
SMALL ANGLE END: 30°~90°
* LENGTH OF TUBE: 300-700 M/M
* MAX. THICKNESS OF TUBE : 1.6 M/M
* SUITABLE FOR TOP TUBE, DOWN TUBE AND SEAT TUBE MILLING.
* ABLE TO MILL 3 ENDS IN ONE OPERATION (DOWN TUBE FOR HEAD END, B.B. END AND SEAT TUBE END).
* ADOPT WITH DISCO MOTORS FOR STEEL AND ALLOY TUBE MILLING.
* ABLE TO MACHINING SMALL CUT BETWEEN SEAT TUBE AND DOWN TUBE
* APPLY TO OFF CENTER B.B. SHELL WITH LIMIT ±20 M/M
* ABLE TO ADJUST MILLING SECTION FOR BEND TUBE.
* WET PROCESS, WITH 1/8HP COOLANT PUMP
* DIMENSION: 2200(L)X1600(W)X1750(H) M/M
* WEIGHT: 1950 KGS
* M/C CYCLE TIME: 20 ~ 30 SEC/PC (DEPENDING ON TUBE MATERIAL AND DIA.)
* CHANGE-OVER TIME: 10 MINS
* TOOL CAN BE RE-SHARPENED. DIAMOND TOOL NOT RECOMMENDED SINCE DURING PROCESS OF SHARPENING WILL CAUSE HEAT AND BREAK TOOL TIP ACCORDINGLY.
